Press Release: Towards the development of the iQonic architecture for zero-defect manufacturing of optoelectronic components

 

The 1st phase (M1-M18) of the iQonic project has just concluded with the 1st Review Meeting with the Project Officer and Monitor. After the collection of requirements, the identification of optoelectronic functionalities and the development of the HW and SW solutions that will compose the iQonic architecture for the zero-defect manufacturing of opto-electronic components, the main technologies and methodologies are now ready for the testing, validation and integration in relevant use-case scenarios.

In the first phase of the iQonic R&D activities, the needs and expectation of the consortium as well as of project’s stakeholders were closely observed and extracted from the project use-cases – ALPES LASER, PRIMA ELECTRO, FILAR OPTOMATERIALS and BRIGHTERWAVE. These results have been collected in a detailed list of technical and non-technical requirements and specifications. Moreover, optoelectronic functionalities for each use case, the generic development frameworks for the assembly processes and the data input and output points in the process chain were defined.

This enabled the development and laboratory testing of the iQonic HW and SW technologies, including the iQonic sensorial network, adaptive optics and electronic nose for evaluation of materials, smart grasping robotic for flexible handling and the Knowledge Based System. In parallel with technical development, a set of innovation management activities took place aiming to develop the roadmap to introduce the iQonic technology to the market, after the end of the project.

In the next months, these technologies will be integrated in the iQonic optoelectronics manufacturing architecture and together with the definition of defect detection and classification techniques – 3D imaging methodologies and smart tagging, defect severity evaluation and decision support systems (DSS), processes and tools for reuse or requalification – and defect management techniques – Predictive Maintenance functionalities: Cyber Physical System – CPS, end-of-life management, Reverse Supply Chain –  will pave the way towards zero-defect manufacturing of opto-electronics and photonics.

 

 

Eventually, starting from the project 2nd phase (M19-M30), iQonic solutions will be integrated and validated at the shop floor level in several demonstrators at iQonic end-users’ facilities.

 

 

About iQonic

The iQonic project stems from the collaboration among companies and research centres in 7 European countries – Finland, Germany, Greece, Italy, United Kingdom, Czech Republic and Switzerland – that, under the coordination of the Fraunhofer Institute, aims at developing a scalable zero-defect manufacturing platform that will guarantee the flexibility and sustainability of the production processes in the optoelectronic industry.

This project receives funding in the European Commission’s Horizon 2020 Research Programme under Grant Agreement Number 818087.

 

Project Partners

  1. ALPES LASERS SA, Switzerland
  2. ATLANTIS ENGINEERING AE, Greece
  3. BRIGHTERWAVE OY, Finland
  4. BRUNEL UNIVERSITY LONDON, United Kingdom
  5. CORE INNOVATION AND TECHNOLOGY OE, Greece
  6. FICONTEC SERVICE GMBH, Germany
  7. FILAR-OPTOMATERIALS SRL, Italy
  8. FOUNDATION FOR RESEARCH AND TECHNOLOGY HELLAS, Greece
  9. FRAUNHOFER IOF, Germany
  10. FYZIKALNI USTAV AV CR V.V.I, Czechia
  11. HOLONIX SRL-SPIN OFF of the POLITECNICO di MILANO, Italy
  12. POLITECNICO DI MILANO, Italy
  13. PRIMA ELECTRO SPA, Italy
  14. SACMI COOPERATIVA MECCANICI IMOLA SOCIETA COOPERATIVA, Italy
  15. SENSAP SWISS AG, Switzerland
  16. THE SHADOW ROBOT COMPANY LIMITED, United Kingdom
  17. TAMPERE UNIVERSITY, Finland

 

Want to know more on iQonic?

Discover our website: www.iqonic-h2020.eu

Follow us on LinkedIn (iQonic Project) and Twitter (@iQonic_project)